2019年5月7日星期二

DJT Carbon is buzzworthy at the Guangzhou Composites Show

Guangzhou Composites & Products Exhibition 2019, the largest composites industry trade event in southern China, was held on April 9 to 11 at Nanfeng International Convention in Guangzhou, China. There are 93 exhibitors at the 2019 event, representing every link in the composites industry’s supply chain, including raw materials, machinery and tooling suppliers, as well as fabricators and important end market OEMs.

We DJT Carbon were at the exhibition at stand A14, we mainly show our carbon fiber tubes and carbon fiber plates, also some parts made by bladder molding technique, the domestic market has a greater and greater demand for these kind of carbon parts, especially for photographic equipments, sports equipments, UAVs, robots, medical equipments.

The Guangzhou Composites Show is very effective, visitors are professional with great interest in our carbon fiber products, three customers placed sample order from us then and there, many visitors expressed the willing of visiting DJT Carbon factory after the show. According to the feedback from the organizing committee, there are 5169 visitors in total.


2019年3月4日星期一

Hollow and Curved Carbon fiber Tubes

Formally we introduced how to make carbon fiber tubes by rolling wrap technique, rolling technique is mainly used in making straight carbon fiber round tubes.

For some curved carbon fiber tubes with hollow structures, bladder molding technique is used, even the parts have complex geometry, strict cosmetic requirements, tight outside tolerance or a combination of all three, bladder molding offers perfect solutions.

DJT Carbon fiber bicycle frame




DJT Carbon fiber photographic equipments 

DJT Carbon fiber curved tubes


The process is as below:

1. The carbon fiber prepregs are wrapped around an inflatable bladder and then placed inside a mold cavity

2. Once the mold is closed, pressure is applied to the inside of the bladder causing the bladder to expand pushing the pr-pregs outward against the inside of the mold cavity

3. Heat is then applied to the mold to solidify or "cure" the composite in the shape of the inside of the mold cavity

If you have any parts to be made in carbon fiber, please feel free to contact DJT Carbon.
Shenzhen DJT Carbon Co.,Ltd
Add: Technology Building,No.102 Xinghua Road,Fuyong Street, BaoAn, Shenzhen, China.
Website: www.djtcarbon.com    www.djtcomposites.com
Email:info@djtcarbon.com;     joe@djtcarbon.com
Tel:0086 755 23574822

2018年11月18日星期日

How to make carbon fiber round tubes


DJT Carbon is a professional manufacturer of carbon fiber products in China. We have 3 techniques to make carbon fiber products, roll wrapping technique (carbon fiber round tubes), compression molding (carbon fiber square tubes or carbon fiber plates and other irregular parts with big quantity), autoclave technique(carbon fiber motorcycle parts and carbon fiber car parts)

Now we introduce you in how to make carbon fiber round tubes by roll wrapping technique.

The prepreg is stored in freezer, then it is taken to the cutting CNC table    

Step 1, Cut prepreg  
The prepreg is cut into patterns with specific fiber orientations.

Step 2, Stick Pattern on mandrel
Spread resin on the mandrels, then stick patterns on mandrels by using electric iron, while tear off the  backing paper or film in the back side of the prepreg.

Step 3, Roll Wrap
 The patterns are rolled into a mandrel to form the size and shape of each tube.

Step 4  Wrap plastic film
Wrap it with a thin plastic film.

Step 5  Hung in oven
High temperature hardens the epoxy resin, form the shape.

Step 6  Extract the mandrel
The mandrel is extracted after curing.

Step 7  Remove plastic film

Step 8  Sand in water
Step 9 Painting
Step 10 Cutting and Packing 

Please check the following video to see more details.
Please feel free to contact us if you have any demands in carbon fiber products
Shenzhen DJT Carbon Co.,Ltd
Add: Technology Building,No.102 Xinghua Road,Fuyong Street, BaoAn, Shenzhen, China.
Website: www.djtcarbon.com    www.djtcomposites.com
Email:info@djtcarbon.com;     joe@djtcarbon.com
Tel:0086 755 23574822

2018年8月27日星期一

Carbon Fiber Telescopic Tubes


Raw Materials: Carbon fiber prepreg
Standard Tube Structure:  The first layer is 3K carbon fiber prepreg, other layers are unidirectional carbon fiber prepreg.
Composites Technique: Roll Wrapping
For more information of this technique, please take a look at this video

DJT Carbon fiber tubing came come in various shapes including round, oval, square, rectangular, hexagonal, octagonal. Besides our standard tube structure, we could also use fiberglass, Kevlar, basalt fiber or other composite prepreg materials according to specific requirements and budget of your project.

DJT Carbon fiber telescopic tubes not only possess common extension and retraction function of telescopic tubes made of other common materials(such as, metal ,plastic), but also are ideal for applications which demand for high strength, extremely light weight and good look.

Common uses of carbon fiber telescopic tubes are fishing poles, flag poles, microphone boom poles, camera booms, tripods for photography and engineering, extending window washing poles, trekking poles, underground detector tube, spear gun tube and so on, DJT Carbon has rich experience in all of these carbon fiber products mentioned above.

Besides roll wrap technique, DJT Carbon has compression molding and autoclave technique, please feel free to send us quotes for your parts to be built in carbon fiber.

Shenzhen DJT Carbon Co.,Ltd
Add: B709,Technology Building,No.102 Xinghua Road,Fuyong Street, BaoAn, Shenzhen, China.
Website: www.djtcarbon.com
Email:info@djtcarbon.com; joe@djtcarbon.com
Tel:0086 755 23574822



Key words:

Carbon fiber telescopic tube,Carbon fiber telescope tube,Carbon fiber telescoping tube,Carbon fiber extendable tube, Carbon fiber extension pole, 
Carbon tubes, carbon fiber tubes,  carbon fibre tubes, DJT Carbon   carbon fiber prepreg , tubes de carbone, Tubos de carbono, 탄소 섬유 튜브, kolfiber tuber, kohlefaser - rohre

2018年8月7日星期二

Colored Reflective Metallic Carbon Fiber Tube Red/Green/Blue Reflective Metallic Carbon Fiber Tube



The colored reflective metallic carbon fiber tube is made by colored reflective fabric which has colored metallic yarn and black carbon fiber together. The colors of the metallic yarn are available in red, green, blue, gold, silver,copper,purple and so on. If you want tubes of these kind of materials,please feel free to contact us. These materials also can apply to other products which requires light weight, high strength and unique apprearance. If you have an idea for something creative,please email us and we’ll see if we can work something out for you.


Shenzhen DJT Carbon Co.,Ltd
Add: B709,Technology Building,No.102 Xinghua Road,Fuyong Street, BaoAn, Shenzhen, China.
Website: www.djtcarbon.com
Email:info@djtcarbon.com; joe@djtcarbon.com
Tel:0086 755 23574822 


Colored Carbon Fiber Tubes





KEY WORDS:
Carbon Fiber Tube
Metallic Carbon Fiber Tube
Reflective Carbon Fiber Tube
Colored Carbon Fiber Tube
Colored Reflective Metallic Carbon Fiber Tube    
Red Reflective Metallic Carbon Fiber Tube
Green Reflective Metallic Carbon Fiber Tube
Blue Reflective Metallic Carbon Fiber Tube
Purple Reflective Metallic Carbon Fiber Tube
Gold Reflective Metallic Carbon Fiber Tube
Silver Reflective Metallic Carbon Fiber Tube
Copper Reflective Metallic Carbon Fiber Tube



2018年7月26日星期四

Carbon Fiber Car Licence Plate Frame/ Carbon Fiber Car Licence Holder





CARBON FIBER CAR LICENCE PLATE FRAME/ CARBON FIBER CAR LICENCE PLATE HOLDER

Material: Carbon Fiber
Pattern: 3K Twill
Surface Finish: Glossy
Function: Protection and decoration
Easy to instal, Customized logo is available.
If you have similar product to be made by carbon fiber, please feel free to send us inquires with detailed requirments.

Shenzhen DJT Carbon Co.,Ltd
Add: B709,Technology Building,No.102 Xinghua Road,Fuyong Street, BaoAn, Shenzhen, China.
Website: www.djtcarbon.com
Email:info@djtcarbon.com; joe@djtcarbon.com
Tel:0086 755 23574822



KEY WORDS: CARBON FIBER CAR LICENCE PLATE FRAME,CARBON FIBER CAR LICENCE PLATE HOLDER, X STYLE

Website: www.djtcarbon.com

2018年7月11日星期三

Carbon Fiber Umbrella Pole/Rod








Carbon fiber umbrella rod/pole

This umbrella pole/rod is made of real carbon fiber material. High specific strength and stiffness coupled with lightweight is the basic characteristics of carbon fiber. Therefore, carbon fiber umbrella rod/pole not only ensures the strength of the umbrella, but also makes it much more convenient for people to carry with. In addition, the unique pattern of carbon fiber makes the umbrella looks simple but understated luxury.
If you have similar products to be made in carbon fiber, please feel free to contact us. We can manufacture according to customer’s design and requirements.

Shenzhen DJT Carbon Co.,Ltd
Add: B709,Technology Building,No.102 Xinghua Road,Fuyong Street, BaoAn, Shenzhen, China.
Email:info@djtcarbon.com
Tel:0086 755 23574822
Website: www.djtcarbon.com




KEY WORDS: Carbon fiber umbrella pole;Carbon fiber umbrella rod; Carbon fiber umbrella handle;Carbon fiber fittings for umbrellas; Carbon fiber parts for umbrellas